About the product
Bottle Washer with Rinser
Model No. SBWR 2H12R
Brush Head – 2 Nos. &Rinser=12 Nos.
Specification:-
We design and fabricate a range of brushing units that are used for cleaning bottles. This unit is assembled on stainless steel base plate with a fiber reinforced plastic (FRP) cover. This cover protects a ¼ HP I Phase 230 V 50 Hz motor that is connected to two stainless steel shafts with pulleys and V-belts. The maintenance of these machines can be done by greasing, V belt tightening and general cleaning. This unit must be mounted on the center of a cement/stainless steel/plastic tank of height 2.5 – 3 feet. The size of the tank depends on the space availability and the number of bottles to be washed. The brushing unit thus mounted has two brushes extending on one side and two brushes on the other. Therefore two people standing on opposite sides on the tank can at once clean 4 bottles.
We fabricate our Bottle Rinses in a range of 12 or 24 bottles. This rinser comprises of a stainless steel pipe and tray. This rinser helps in rinsing of dust particles or soap water from the bottles. Our range of machines requires very little maintenance.
• The Rinser is available for 12 or 24 bottles
• It can be fitted on top of a cement/stainless steel/plastic tank
• The Rinser consists of a Stainless Steel pipe and tray
• The Bottle Rinser is connected to a water source like overhead tank. The ball valve on the machine is in closed position. 12/24 Bottles are kept up side down in the 12/24 Rubber cups provided. Then the ball valve is opened. Water jets into each of the bottles. The bottles are thus rinsed of dust particles or soap water, the rinsed water falls back into the tank and can be filtered and re-pumped. Approximately 24/48 bottles can be rinsed per minute.
• If there is no overhead tank, the rinser can be supplied with a pump.
Model No. SBWR 2H12R
Brush Head – 2 Nos. &Rinser=12 Nos.
Specification:-
We design and fabricate a range of brushing units that are used for cleaning bottles. This unit is assembled on stainless steel base plate with a fiber reinforced plastic (FRP) cover. This cover protects a ¼ HP I Phase 230 V 50 Hz motor that is connected to two stainless steel shafts with pulleys and V-belts. The maintenance of these machines can be done by greasing, V belt tightening and general cleaning. This unit must be mounted on the center of a cement/stainless steel/plastic tank of height 2.5 – 3 feet. The size of the tank depends on the space availability and the number of bottles to be washed. The brushing unit thus mounted has two brushes extending on one side and two brushes on the other. Therefore two people standing on opposite sides on the tank can at once clean 4 bottles.
We fabricate our Bottle Rinses in a range of 12 or 24 bottles. This rinser comprises of a stainless steel pipe and tray. This rinser helps in rinsing of dust particles or soap water from the bottles. Our range of machines requires very little maintenance.
• The Rinser is available for 12 or 24 bottles
• It can be fitted on top of a cement/stainless steel/plastic tank
• The Rinser consists of a Stainless Steel pipe and tray
• The Bottle Rinser is connected to a water source like overhead tank. The ball valve on the machine is in closed position. 12/24 Bottles are kept up side down in the 12/24 Rubber cups provided. Then the ball valve is opened. Water jets into each of the bottles. The bottles are thus rinsed of dust particles or soap water, the rinsed water falls back into the tank and can be filtered and re-pumped. Approximately 24/48 bottles can be rinsed per minute.
• If there is no overhead tank, the rinser can be supplied with a pump.
Contact with supplier
Company